H.
Nomura, S. Parekh, J.R. Selman and S. Al-Hallaj, Fabrication of YSZ
electrolyte for intermediate temperature solid oxide fuel cell using
electrostatic sopray deposition (ESD), Part II: Cell performance,
J.Appl. Electrochemistry available online 15 Sept 2005
S.A. Khateeb, M. M/ Farid, J.R. Selman and S. Al-Hallaj, Mechanical
electrochemical modeling of Li-ion battery designed for an electric
scooter, J. Power Sources, in press.
S. Al-Hallaj, S. Parekh, M.M. Farid, and J.R. Selman, Solar
desalination with humidification-dehumidification cycle review of
economics, Desalination, in press
S.A. Khateeb, S. Amiruddin, M.M. Farid, J.R. Selman, and S.
Al-Hallaj, Thermal management of lithium-ion battery with phase
change material for an electric scooter: experimental validation, J.
Power Sources, in press
A. Mills, M.M.farid, J.R. Selman, and S.Al-Hallaj, Thermal
conductivity enhancement of phase change materials using a graphite
matrix, J. Applied Thermal Engineering, in press
J.R. Selman, J. Poulsen, N. Bonanos, and P. V. Hendriksen, Curent
interruption / potential relaxation as a diagnostic tool for SOFC
performance measurement, Proc. Int. Symp. High-temperature
Electrochemistry, Risoe (Denmark), Sept. 2005
H. Nomura, S. Parekh, J.R. Selman and
S. Al-Hallaj, “Fabrication of YSZ Electrolyte using Electrostatic
Spray Deposition (ESD): Part 1. A Comprehensive Parametric Study”,
J. Appl. Electrochemistry, 35 (2005) 61-67
S.G. Hong and J.R. Selman, “Wetting
Characteristics of Carbonate Melt under MCFC Operating Conditions”,
J.Electrochem.Soc. 151 (2004) A77-A84
S.G. Hong and J.R. Selman, “A
Stochastic Structure Model for Liquid-Electrolyte Fuel Cell
Electrodes, with Special Application to MCFC. Part 2.”,
J.Electrochem. Soc.(2004) page and vol# later today
S.G. Hong and J.R. Selman, “A
Stochastic Structure Model for Liquid-Electrolyte Fuel Cell
Electrodes, with Special Application to MCFC. Part 1.”,
J.Electrochem. Soc.(2004) page and vol# later today
S. Al-Hallaj, F. Alasfour, S. Parekh,
S. Amiruddin, J.R. Selman and H. Ghezel-Ayagh, “Conceptual Design of
a Novel Hybrid Fuel Cell/Desalination System”, Desalination 164
(2004) 19-31
A. M. Al-Qattan, D. J. Chmielewski,
S. Al-Hallaj, and J. R. Selman, “A Novel Design for Solid Oxide Fuel
Cell Stacks”, Chemical Engineering Science, 59 (2004) 131-137
S. Amiruddin Khateeb, M.M.Farid, J.
R. Selman, and S. Al-Hallaj, “Design and Simulation of Lithium-Ion
Battery with Phase Change Material Thermal Management System for an
Electric Scooter”, Journal of Power Sources, 128 (2004) 292-307
M. Khaleel,and J.R. Selman, “Stack
and System Modeling” in “High-Temperature Solid Oxide Fuel Cells:
Fundamentals, Design, and Applications” (S. Singhal and K. Kendall,
Eds) Ch.11, pp. 293-331, Elsevier (2003)
G. DiGiuseppe and J.R. Selman, “Thin
film deposition of Mo and Mo-compounds by PECVD from Mo(CO)6 and
MoF6 as precursors: characterization of films and thermodyna,ic
analysis”, J. Electroanal.Chem. 559 (2003) 31-43 |
